🎮gaming 8bitdo pro 2 walkthrough
- Thread starter fukurou
- Start date
vidya related
android
1 mode D (button on back of controller)
2 press start, LED blinks left to right
3 enter pair mode, press pair btn 3sec, led will briefly blink
(this is required for the very 1st time only)
4 go to android bluetooth settings and turn it on
5 pair with [wireless controller]
6 LED becomes solid when connection is successful
once it has been paired, the controller will auto reconnect
to your mac with the press of start.
wired connection
1 mode D (button on back of controller)
2 press start, LED blinks left to right
3 connect the controller via the(8bitdo pro 2) usb cable
4 wait till connection is established
1 mode D (button on back of controller)
2 press start, LED blinks left to right
3 enter pair mode, press pair btn 3sec, led will briefly blink
(this is required for the very 1st time only)
4 go to android bluetooth settings and turn it on
5 pair with [wireless controller]
6 LED becomes solid when connection is successful
once it has been paired, the controller will auto reconnect
to your mac with the press of start.
wired connection
1 mode D (button on back of controller)
2 press start, LED blinks left to right
3 connect the controller via the(8bitdo pro 2) usb cable
4 wait till connection is established
mac OS
1 mode A (button on back of controller)
2 press start, LED blinks left to right
3 enter pair mode, press pair btn 3sec, led will briefly blink
(this is required for the very 1st time only)
4 go to macOS bluetooth settings and turn it on
5 pair with [wireless controller]
6 LED becomes solid when connection is successful
once it has been paired, the controller will auto reconnect
to your mac with the press of start.
wired connection
1 mode A (button on back of controller)
2 press start, LED blinks left to right
3 connect the controller via the(8bitdo pro 2) usb cable
4 wait till connection is established
1 mode A (button on back of controller)
2 press start, LED blinks left to right
3 enter pair mode, press pair btn 3sec, led will briefly blink
(this is required for the very 1st time only)
4 go to macOS bluetooth settings and turn it on
5 pair with [wireless controller]
6 LED becomes solid when connection is successful
once it has been paired, the controller will auto reconnect
to your mac with the press of start.
wired connection
1 mode A (button on back of controller)
2 press start, LED blinks left to right
3 connect the controller via the(8bitdo pro 2) usb cable
4 wait till connection is established
switch
1 mode S (button on back of controller)
2 press start, LED blinks left to right
3 enter pair mode, press pair btn 3sec, led will briefly blink
(this is required for the very 1st time only)
4 go to switch homepage, controllers, change grip/order
5 LED becomes solid when connetion has been established
once it has been paired, the controller will auto reconnect
to your switch with the press of start.
wired connection
1 mode S (button on back of controller)
2 press start, LED blinks left to right
3 connect the controller to it's switch dock via the(8bitdo pro 2) usb cable
4 wait till connection is established
* switch system needs to be 3.3.3 or above for wired connection
system settings, controller and sensors, turn on pro controller wired communication
*LED lights indicate player number up to 4 players
1 mode S (button on back of controller)
2 press start, LED blinks left to right
3 enter pair mode, press pair btn 3sec, led will briefly blink
(this is required for the very 1st time only)
4 go to switch homepage, controllers, change grip/order
5 LED becomes solid when connetion has been established
once it has been paired, the controller will auto reconnect
to your switch with the press of start.
wired connection
1 mode S (button on back of controller)
2 press start, LED blinks left to right
3 connect the controller to it's switch dock via the(8bitdo pro 2) usb cable
4 wait till connection is established
* switch system needs to be 3.3.3 or above for wired connection
system settings, controller and sensors, turn on pro controller wired communication
*LED lights indicate player number up to 4 players
windows
1 mode X (button on back of controller)
2 press start, LED blinks left to right
3 enter pair mode, press pair btn 3sec, led will briefly blink
(this is required for the very 1st time only)
4 go to windows settings, devices, bluetooth, turn it on
5 pair with [wireless controller]
6 LED becomes solid when connection is successful
once it has been paired, the controller will auto reconnect
to your mac with the press of start.
wired connection
1 mode X (button on back of controller)
2 press start, LED blinks left to right
3 connect the controller via the(8bitdo pro 2) usb cable
4 wait till connection is established
1 mode X (button on back of controller)
2 press start, LED blinks left to right
3 enter pair mode, press pair btn 3sec, led will briefly blink
(this is required for the very 1st time only)
4 go to windows settings, devices, bluetooth, turn it on
5 pair with [wireless controller]
6 LED becomes solid when connection is successful
once it has been paired, the controller will auto reconnect
to your mac with the press of start.
wired connection
1 mode X (button on back of controller)
2 press start, LED blinks left to right
3 connect the controller via the(8bitdo pro 2) usb cable
4 wait till connection is established
macro
support.8bitdo.com for ultimate software:
create macros with p1,p2 buttons, customise button mapping,adjust sensitivity
and control vibration power
*press profile switch btn, to switch between 3 custom profiles
the profile indicator will not light up on the default profile
support.8bitdo.com for ultimate software:
create macros with p1,p2 buttons, customise button mapping,adjust sensitivity
and control vibration power
*press profile switch btn, to switch between 3 custom profiles
the profile indicator will not light up on the default profile